Rode NTG4 Shotgun Microphone

Rs.30,400.00

Key Features
  • For Indie Films, TV & Documentaries
  • Convenient Digital Switching
  • Phantom Powered
  • Switchable Treble Boost and -10 dB Pad
  • Selectable 75 Hz Low-Cut Filter
  • Low-Noise Circuitry
  • High Sensitivity and High Max SPL
  • Warm and Natural Tone
  • Windscreen Reduces Wind Noise
  • Lightweight Metal Housing
SKU: NTG4 Shotgun Mike Categories: ,

Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4 phantom-powered shotgun microphone. Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production.

The NTG4’s elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG4 delivers warm sound due in part to its gentle dip in high frequencies and its rumble-reducing selectable low-cut filter. A switchable treble boost is on hand for situations where additional clarity is needed.

Quality Sound Capture

The combination of the NTG4’s 8.9″ long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

Phantom Powered

Thanks to its 3-pin XLR output and compliance with 12, 24, or 48 VDC phantom power, the NTG4 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.

Customizable Tone via Digital Switching

Digital switching not only allows for intuitive access to the NTG4’s settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level.

Ideal for Boompole Mounting

The lightweight, metal-bodied NTG4 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

Windscreen Minimizes Wind Noise

The NTG4 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

Specification

Microphone

Form Factor Stand/Boom Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Condenser
Diaphragm 0.5″ / 12.70 mm
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State
Pad -10 dB
High-Pass Filter 75 Hz
Tone Adjustment High Boost:
+6 dB
Indicators Single LED (Status, Power)
On-Board Controls High-Pass Filter, HF, Pad
Windscreen Foam (Included)

Performance

Frequency Range 20 Hz to 20 kHz
Maximum SPL 135 dB SPL
Off-Axis Rejection 5 dB at 60°
24 dB at 120°
18 dB at 180°
Impedance 200 Ohms
Sensitivity -32 dBV/Pa at 1 kHz
Dynamic Range 119 dB
Signal-to-Noise Ratio 78 dB
Equivalent Noise Level 16 dB A-Weighted

Connectivity

Output Connectors (Analog) 1 x XLR 3-Pin

Power

Operating Voltage 12 to 48 V
Operating Current Consumption 4.5 mA

Physical

Color Black
Mounting 3/8″-16 Female, 5/8″-27 Female, Mic Clip (with Included Hardware)
Construction Material Metal
Dimensions ø: 0.87 x L: 8.86″ / ø: 22 x L: 225 mm
Weight 4.44 oz / 126 g (Microphone)

Reviews

There are no reviews yet.

Be the first to review “Rode NTG4 Shotgun Microphone”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Shipping Details

  • Please pay more attention to your order address which MUST MATCH your shipping address. (If you’re from Russia, Please leave your full name. It is very important)
  • Items will be shipped within 3 business days after payment.
  • Please check items when delivered, if damaged, please kindly accept it and contact us immediately.  We will make a confirmation and resend you a new one.

 

Shipping By Shipping Cost Estimated Delivery Time Tracking Information
Thembay Express Free Shipping 12-20 days Not available
LEX $20.00 - $50.00 04-12 days Available
Lorem Ex $26.00 - $70.00 03-17 days Available

Packaging Details

  • Unit Type: piece
  • Package Size: 25cm x 32cm x 5cm (9.84in x 12.60in x 1.97in)
  • Package Weight: 0.56kg (1.23lb.)